Do Not Install the Instrument in the Following Places
• Outdoors
• In direct sunlight or near sources of heat
• Where the instrument is exposed to water or other liquids
• Where an excessive amount of soot, steam, dust, or corrosive gas is present
• Near sources of strong magnetic fields
• Near high-voltage equipment or power lines
• In an environment that is subject to large levels of mechanical vibration
• On an unstable surface
Storage Location
When storing the instrument, avoid the following places.
• Where the relative humidity is 80% or higher
• In direct sunlight
• Where the temperature is 60°C or higher
• Near a strong source of heat or moisture
• Where the level of mechanical vibration is high
• Where there are corrosive or explosive gasses
• Where an excessive amount of soot, dust, salt, or iron is present
• Where water, oil, or chemicals may splash
We recommend that the instrument be stored in an environment where the temperature
is between 5°C and 40°C and the relative humidity is between 20% RH and 80% RH.
Rack Mount
To mount the instrument in a rack, use the separately sold rack mount kit. For the
procedure to rack mount the GS200, see the instructions that are included with the rack
mount kit.
Name Model Note
Rack mount kit 751533-E2 For EIA single mount
Rack mount kit 751534-E2 For EIA dual mount
Rack mount kit 751533-J2 For JIS single mount
Rack mount kit 751534-J2 For JIS dual mount
3.2 Installation
3-5
IM GS210-01EN
Instrument Preparation and Common Operations
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
App
Index
To Next Page
Loading...
Need help?
General
