xi
IM 05P02D41-01EN
HowtoUseThisManual
For the ladder sequence and communication functions, see the respective manuals. This
user’smanualisorganizedintoChapters1to18asshownbelow.Thismanualmainly
uses the illustrations of the UP35A for describing the operations and functions. The basic
operations are the same for the UP32A, so please read them in the same way.
Chapter Title and Description
1
Introduction to Functions
Describes the main functions of the UP35A/UP32A.
2
UP35A/UP32A Operating Procedures
Describes the flow from unpacking to regular operations.
3
Part Names
Describes part names and functions on the front panel.
4
Basic Operation
Describes basic operation of the UP35A/UP32A.
5
QuickSettingFunction
Describes the minimum necessary settings for operation.
6
MonitoringandControlofRegularOperations
Describes monitoring displays of regular operations and operation.
7
Input (PV) Functions
Describes PV input and advanced secondary control input.
8
Control Functions
Describes basic control and advanced control.
9
Program Pattern Functions
Describes program pattern functions
10
Output (Control and Retransmission) Functions
Describes output functions.
11
Alarm Functions
Describes alarm output and status output.
12
Contact Input/Output Functions
Describes contact input/output functions.
13
Display,Key,andSecurityFunctions
Describes display, user function key and security functions.
14
Parameter Initialization
Describestheinitializationtofactorydefaultvaluesandtouserdefaultvalues.
15
PowerFailureRecoveryProcessing/PowerFrequencySetting/OtherSettings
Describes operations performed after momentary power interruption and power
failures.
16
Troubleshooting,Maintenance,andInspections
Describes troubleshooting, maintenance, periodic inspections, and disposal.
17
Installation and Wiring
Describes installation and wiring.
18
Parameters
Provides parameter maps.
GS
Specifications
Provides the UP35A/UP32A specifications.
To Next Page
Loading...
Need help?
General
