YOKOGAWA UP35A - Chapter 14 Parameter Initialization; Initializing Parameter Settings to Factory Default Values

14-1
IM 05P02D41-01EN
Parameter Initialization
14
14.1 InitializingParameterSettingstoFactory
DefaultValues
Description
Parametersettingscanbeinitializedtothefactorydefaultvalues.
Theladderprogramisalsoinitializedtothefactorydefault.
All program patterns can not be cleared during program pattern operation. Can be
cleared in RESET mode.
Use the key or LL50A Parameter Setting Software to execute it.
Note
Theusersettingvalues(defaults)arenotinitializedeveniftheparametersettingvaluesare
initializedtothefactorydefaultvalues.
SettingDetails
Parameter
symbol
Name
Display
level
Settingrange Menusymbol
F.DEF
Initializationtofactory
default value
PRO
-12345:Initialization,
automatically returned to "0"
afterinitialization.
INIT
P.DEF
Clearing all program
pattern data
PRO
13579:Initialization,
automatically returned to "0"
afterinitialization.
Chapter 14 Parameter Initialization