YOKOGAWA UP35A User Manual

13-19
IM 05P02D41-01EN
Display, Key, and Security Functions
13.3 SettingSecurityFunctions
13.3.1 SettingorclearingthePassword
Description
The password function can prevent inadvertent changes to the parameter settings.
If a password is set, the checking is required when moving to the Setup Parameter
Setting Display. When the password is verified, can be changed to the Setup Parameter
Setting Display. The parameters in the following menus can be set only when the
password is verified.
CTL, PV, MPV, OUT, HBA, R485, ETHR, PROF, DNET, CC-L, KEY, DISP, CSEL, KLOC,
MLOC, DI.SL, DI.NU, DI.D, ALM, DO, I/O, SYS, INIT, VER, and LVL.
When each parameter is displayed, the terminal area (E1 to E4) is displayed on Group
display according to the suffix code and optional suffix code.
Always remember your password when using the password function.
To clear the password, set parameter PASS to “0.”
SettingDetails
Parameter
symbol
Name
Display
level
Settingrange Menusymbol
PASS Password setting EASY 0 (No password) to 65535 SYS
13.3.2 SettingParameterDisplayLevel
Description
Parameter display level can be set according to the setting level.
► Parameterdisplaylevel:Chapter18Parameters
SettingDetails
Parameter
symbol
Name
Display
level
Settingrange Menusymbol
LEVL
Parameter display
level
EASY
EASY: Easy setting mode
STD: Standard setting mode
PRO: Professional setting mode
LVL
13

YOKOGAWA UP35A Specifications

General

Brand	YOKOGAWA
Model	UP35A
Category	Controller
Language	English