YOKOGAWA UP35A - Switching between AUTO and man; Selecting by MODE Key; Selecting by Operation Mode Parameter

6-33
IM 05P02D41-01EN
Monitoring and Control of Regular Operations
6
6.6.6 SwitchingbetweenAUTOandMAN
SelectingbyMODEKey
SettingDisplay
From Auto to Man
From Man to Auto
MAN lamp is unlit
in MAN mode.
(The lamp is unlit
after the switching
operation is
completed.)
MAN lamp is lit in
MAN mode. (The
lamp is lit after the
switching
operation is
completed.)
Each time you press the key,
Operation modes is switched.
Display MODE AUTO (blinking), and press the SET/ENTER key.
Each time you press the key,
Operation modes is switched.
Display MODE MAN (blinking), and press the SET/ENTER key.
SelectingbyOperationModeParameter
SettingDisplay
Parameter Setting Display
Operation Display > PARAMETER key or PARA key for 3
seconds (to [MODE] Menu Display) > SET/ENTER key (The
setting parameter is displayed.) > Downarrow key (The
setting parameter is displayed.)
SettingDetails
Parameter
symbol
Name
Display
level
Settingrange Menusymbol
A.M
AUTO/MAN
switch
EASY
AUTO: Automatic mode
MAN: Manual mode
MODE
6.6SwitchingOperationModes