YOKOGAWA UP35A - Selecting by Operation Mode Parameter; Selecting Start-Of-Program Pattern Number; Selecting by MODE Key

6-36
IM 05P02D41-01EN
6.7 SelectingStart-of-programPatternNumber
SelectingbyMODEKey
SettingDisplay
Every time you press the MODE key, the operation
mode is switched.
Display SST (start-of-program segment number),
and press the SET/ENTER key.
SelectingbyOperationModeParameter
SettingDisplay
Parameter Setting Display
Operation Display > PARAMETER key or PARA key for 3
seconds (to [MODE] Menu Display) > SET/ENTER key (The
setting parameter is displayed.) > Downarrow key (The
setting parameter is displayed.)
SettingDetails
Parameter
symbol
Name
Display
level
Settingrange Menusymbol
SST
Start-of-program
segment number
EASY
1 to 20 (40 when the option “/AP”
isspecied.)
MODE