YOKOGAWA UP35A User Manual

4-8
IM 05P02D41-01EN
Time(minute.second)Setting
Example of 17 minutes 59 seconds
1
. Display the Parameter Setting Display.
2
. Press the SET/ENTER key to move to the
setting mode (the setpoint blinks).
3
. Press the Left arrow key to move one digit to
the left.(press the Right arrow key to move one
digit to the right.)
4
. Press the Up or Down arrow key to change the
setpoint. Press the Up arrow key when 5 is
displayed to move one digit to the left. Press
the Down arrow key when 0 is displayed to
move one digit to the right.
5
. Press the SET/ENTER key to register the
setpoint.
4.2HowtoSetParameters

YOKOGAWA UP35A Specifications

General

Brand	YOKOGAWA
Model	UP35A
Category	Controller
Language	English