YOKOGAWA UP35A - Page 84

6-23
IM 05P02D41-01EN
Monitoring and Control of Regular Operations
6
SelectingbyOperationModeParameter
SettingDisplay
Parameter Setting Display
Operation Display > PARAMETER key or PARA key for 3
seconds (to [MODE] Menu Display) > SET/ENTER key (The
setting parameter is displayed.) > Downarrow key (The
setting parameter is displayed.)
SettingDetails
Parameter
symbol
Name
Display
level
Settingrange Menusymbol
PTNO.
Program pattern
number selection
EASY
0: Not select program pattern
1 to 2 (4 when the option “/AP” is
specied.)
MODE
Description
Before starting program operation, select the program pattern number to execute.
When a program pattern is not created, or when program operation is being performed,
the program pattern number cannot be selected.
Selecting the program pattern number can be performed by any of the following:
(1) PTN key (The PTN key action can be changed by a parameter)
(2) Operation mode parameter
(3) Contact input
(4) Communication
► Selectionbycontactinput:12.1SettingContactInputFunction
6.5SelectingProgramPatternNumber(PTNO.)