Zebra DS6878 - Page 136

5 - 40 DS6878 Product Reference Guide
Example 1
To decode one Code 128 bar code anywhere in the image (even when bar codes of other types are in view), as
in Figure 5-2, program the expression as follows:
The expression in decimal is (formatted for readability):
1 C 2 0 8 ;
To program the expression via scanning parameters the sequence is (spaces are for readability):
[MultiCode-Expression] 01 C 02 00 08 ; [End Of Message]
To program the expression via host command (SSI/SNAPI) the sequence is:
0x01 0x43 0x02 0x00 0x08 0x3b
Figure 5-2 Multicode Expression Example 1
NOTE The CR0078-S cradle supports SSI. The CR0078-P cradle supports SNAPI.
0
12
3
4
5
6
7
8
9
0
5
50%
0%
100%
0%
50%
100%
PDF417 Code
Code 128 Code
UPC-A Code