3 - 26 MP7000 Scanner Scale Integrator Guide
8. Place the left side bracket above the left screw hole, keep one lower wire below the bracket, and dress it
across, below the vertical window.
Figure 3-33 Secure Left Side Bracket - Dress Wire Across
9. Screw down the bracket keeping one lower wire below the bracket and dress it across, below the vertical
window.
Figure 3-34 Screw Down Left Bracket
10. When installation is complete the wiring, left side and right side brackets, and antenna should resemble the
placement in
Figure 3-35.
To Next Page
Loading...