DATA, FILE AND PROGRAM TRANSFER
Section 7, Page 5 May 2002
Option 4 – Input Field Data Block(s)
For training or demonstration purposes, additional data can be appended to the Field Data Cache.
1. Connect the GDP-32
II
serial port to an external computer with a serial cable.
NOTE: The first data block number should be equal to the number of data blocks
to receive.
2. Press .
3. Start the serial transfer program on the remote computer.
NOTE: If Option 4 is selected without a serial connection in place, the receiver
will suspend functions waiting to receive data. Re-boot the system by pressing
Control – Alt – Delete.
4. When the data transfer is complete the screen displays:
Exiting – press a key
5. Press any key to accept the new field data and return to the Field Data Main Menu.
To Next Page
Loading...
