RPIP PROGRAM
Section 8, Page 11 January 2003
Upon pressing
Enter
to save the data (or
Escape
to discard the data), the screen
appears as follows. The only difference in screens is the change in last block number
(0095) and the bottom command line.
0208 RPIP0613 11.7 08 Jan 18 13:58:31
Survey D-D Stacks 1/ 1
Tx 1 Rx 3 N OUT
.125 Hz 4/ 4 Cycles Tx Curr 1
CH N MAG
φ
rho GGGA SEM SP
1 ON 1 1.2737 0.1 1086 000O 0.01 -7.14
2 ON 2 1.2736 0.1 7542 000O 0.00 -3.85
3 OFF
4 OFF
CONT-Take data, ESC-Prev menu
To Next Page
Loading...
