NATURAL SOURCE MAGNETOTELLURICS
May 2002 Section 13, Page 32
If the operator presses
Escape
while the
program is acquiring data, the prompt
"Exit time schedule" will be
displayed as above.
If the operator presses
Escape
while the
program is waiting for the next frequency
to start, the program will automatically exit
the time schedule mode. Press
(SCHED) to reenter the time schedule setup
table, make any changes desired, and then
press
Enter
to get back into the
automatic data acquisition mode.
0097 AMT 0538 12.3 15 Mar 98 09:50:42
Survey Tensor AMT Stop Time 09:47:00
Tx 1 Rx 1 N OUT
384-8192 10/ 10 Stacks
CH Sta/Ant MAG CC/
φ
φφ
φ
rho GGGA
1Ex 1347.46u 0.040108.7000O
2Hy 147.9696u3126.8 0000O
3Ey 1382.29u 0.02367.56000O
4Hx 247.7244u 115.3 0000O
5OFF
6OFF
7OFF
8OFF
Exit time schedule? (1 - yes, 2 - no)
To Next Page
Loading...
