GDP-32
II
INSTRUCTION MANUAL
May 2002 Section 5, Page 4
Utilities Option 8 – GPS Status
Displays the status of the internal GPS timing, if the GPS system is installed. Gives the number
of satellites being tracked and whether or not the receiver is in time sync with the GPS system.
OPTIONS 3 TO 9 - FIELD SURVEY PROGRAMS
Menu options 3 through 9 on the Main Program Menu select specific survey programs. Refer to
the appropriate survey program section for specific operating procedures.
Available survey programs are:
3. RPIP - Resistivity-Phase Induced Polarization
4. TDIP - Time Domain Induced Polarization
5. CR - Complex Resistivity, and Harmonic CSAMT (HACSAMT)
6. CSAMT - Controlled Source Audio-Frequency Magnetotellurics
7. TEM - Transient Electromagnetics
8. AMT/MT - Natural Source Audio-Frequency Magnetotellurics, and Magneto-
tellurics
9. NanoTEM - Fast (1.2 µs) sample rate TEM. (Available when a NanoTEM analog
card is installed.)
Use Section 4 - Quick Start Tutorial to turn on a program and become familiar with the GDP-
32
II
. Controlled Source programs use a common set of user-selectable settings.
To Next Page
Loading...
