ACCESSING PROGRAMS
Section 5, Page 7 May 2002
NOTE: Some values are not registered in computer memory until you exit the parameter field.
An exception to this rule is the Hz (frequency) field.. Whenever you change the frequency it is
automatically changed through the timing card. However, the anti-alias filter is not changed
until just prior to data acquisition. Upon pressing
Enter
the receiver automatically sets the
anti-alias filter as defined by internal look-up tables.
Additional Options:
Press
to temporarily exit the data taking routine and look at data in the Field
Data Cache
. See Section 7 - Handling Data for information about Data Mode.
Press
Enter
to proceed to the next menu.
Press
Escape
to return to the previous menu.
To Next Page
Loading...
