ABB Relion 670 series - Setting parameters; Technical data; SPA communication protocol; Introduction

Name Function
block
SPA
address
Description
Update Block SXSWI26 3 I 662 SPA parameter for update block
command
Update Block SXSWI27 3 I 681 SPA parameter for update block
command
Update Block SXSWI28 3 I 700 SPA parameter for update block
command
17.4.3 Setting parameters
Table 626: HORZCOMM Non group settings (basic)
Name Values (Range) Unit Step Default Description
Operation Disabled
Enabled
- - Disabled Operation
Table 627: ADE Non group settings (basic)
Name Values (Range) Unit Step Default Description
Operation Disabled
Enabled
- - Disabled Operation
TimerClass Slow
Normal
Fast
- - Slow Timer class
17.4.4 Technical data
Table 628: LON communication protocol
Function
Value
Protocol LON
Communication speed 1.25 Mbit/s
17.5 SPA communication protocol
17.5.1 Introduction
In this section the most common addresses for commands and events are available. For
other addresses, refer to section "Related documents".
It is assumed that the reader is familiar with the SPA communication protocol in general.
Section 17 1MRK505222-UUS C
Station communication
1026
Technical reference manual