ABB Relion 670 series - Setting parameters; Technical data; Intended audience; Related documents

1.1.3.5 Setting parameters
These are presented in tables and include all parameters associated with the function in
question.
1.1.3.6 Technical data
The technical data section provides specific technical information about the function or
hardware described.
1.1.4 Intended audience
General
This manual addresses system engineers, installation and commissioning personnel,
who use technical data during engineering, installation and commissioning, and in
normal service.
Requirements
The system engineer must have a thorough knowledge of protection systems,
protection equipment, protection functions and the configured functional logics in the
protective devices. The installation and commissioning personnel must have a basic
knowledge in the handling electronic equipment.
1.1.5 Related documents
Documents related to RED670
Identity number
Operator’s manual 1MRK 505 223-UUS
Installation and commissioning manual 1MRK 505 224-UUS
Technical reference manual 1MRK 505 222-UUS
Application manual 1MRK 505 225-UUS
Product guide customized 1MRK 505 226-BUS
Product guide pre-configured 1MRK 505 228-BUS
Sample specification SA2005-001281
Connection and Installation components 1MRK 513 003-BEN
Test system, COMBITEST 1MRK 512 001-BEN
Accessories for 670 series IEDs 1MRK 514 012-BEN
670 series SPA and signal list 1MRK 500 092-WUS
Table continues on next page
Section 1 1MRK505222-UUS C
Introduction
42
Technical reference manual