ABB Relion 670 series - Local HMI related functions; Introduction; General setting parameters; Status LEDs

3.5 Local HMI related functions
3.5.1 Introduction
The local HMI can be adapted to the application configuration and to user preferences.
• Function block LocalHMI
• Function block LEDGEN
• Setting parameters
3.5.2 General setting parameters
Table 8: SCREEN Non group settings (basic)
Name Values (Range) Unit Step Default Description
Language English
OptionalLanguage
- - English Local HMI language
DisplayTimeout 10 - 120 Min 10 60 Local HMI display timeout
AutoRepeat Disabled
Enabled
- - Enabled Activation of auto-repeat (On) or not (Off)
ContrastLevel -10 - 20 % 1 0 Contrast level for display
DefaultScreen 0 - 0 - 1 0 Default screen
EvListSrtOrder Latest on top
Oldest on top
- - Latest on top Sort order of event list
SymbolFont IEC
ANSI
- - IEC Symbol font for Single Line Diagram
3.5.3 Status LEDs
3.5.3.1 Design
The function block LocalHMI controls and supplies information about the status of the
status indication LEDs. The input and output signals of local HMI are configured with
PCM600.
The function block can be used if any of the signals are required in a configuration logic.
See section "Status indication LEDs" for information about the LEDs.
1MRK505222-UUS C Section 3
Local HMI
61
Technical reference manual