IEC09000974 V1 EN
Figure 525: SOM Static output principle
1MRK002802-AB-13-670-1.2-PG-ANSI V1 EN
Figure 526: Connection diagram of the static output module
19.2.11.3  Technical data
Table 698: SOM - Static Output Module (reference standard: IEC 61810-2): Static binary outputs
Function of quantity
Static binary output trip
Rated voltage 48 - 60 VDC 110 - 250 VDC
Number of outputs 6 6
Impedance open state ~300 kΩ ~810 kΩ
Test voltage across open contact, 1
min
No galvanic separation No galvanic separation
Current carrying capacity:    
Continuous 5A 5A
1.0s 10A 10A
Making capacity at capacitive load
with the maximum capacitance of
0.2 μF :
   
0.2s 30A 30A
1.0s 10A 10A
Table continues on next page
Section 19 1MRK505222-UUS C
IED hardware
1108
Technical reference manual