ABB Relion 670 series - Side-by-side flush mounting dimensions

Case size
Tolerance
Cut-out dimensions (inches)
A
+/0.04
B
+/0.04
C D
6U, 1/2 x 19” 8.27 10.01 0.16–0.39 0.49
6U, 3/4 x 19” 12.69 10.01 0.16–0.39 0.49
6U, 1/1 x 19” 17.11 10.01 0.16–0.39 0.49
E = 188.6 mm without rear protection cover, 229.6 mm with rear protection cover
19.3.4 Side-by-side flush mounting dimensions
xx06000182.vsd
IEC06000182 V1 EN
Figure 551: A 1/2 x 19” size 670 series IED side-by-side with RHGS6.
Section 19 1MRK505222-UUS C
IED hardware
1140
Technical reference manual