ABB Relion 670 series - Functionality and behaviour; Graphical display

12.5.2.1 Functionality and behaviour
Ctrl/Com
Single Command
Selector Switch (GGIO)
../Ctrl/Com/Sel Sw
SLGGIO1
SLGGIO2
..
..
SLGGIO15
Control
Measurements
Events
Disturbance records
Settings
Diagnostics
Test
Reset
Authorization
Language
4
Control
Single Line Diagram
Commands
../Com/Sel Sw/
SLGGIO3
Damage ctrl
../Com/Sel Sw/
SLGGIO3
Damage ctrl
4
P:Disc All
N: Disc Fe
OK Cancel
../Com/Sel Sw/
DmgCtrl
Damage ctrl:
7
The dialog window that appears
shows the present position (P:)
and the new position (N:), both
in clear names, given by the
user (max. 13 characters).
E
Modify the position with arrows.
The pos will not be modified (outputs
will not be activated) until you press
the E-button for O.K.
IEC06000420-2-en.vsd
1
2
3
4
5
IEC06000420 V2 EN
Figure 378: Example 1 on handling the switch from the local HMI.
From the local HMI:
1
SLGGIO instances in the ACT application configuration
2 Switch name given by the user (max 13 characters)
3 Position number, up to 32 positions
4 Change position
5 New position
12.5.2.2 Graphical display
There are two possibilities for SLGGIO
Section 12 1MRK505222-UUS C
Control
756
Technical reference manual