ABB Relion 670 series - Setting parameters

Name Type Description
ERFALM BOOLEAN Alarm for reactive forward energy exceed limit in set
interval
ERRALM BOOLEAN Alarm for reactive reverse energy exceed limit in set
interval
EAFACC REAL Accumulated forward active energy value in Ws
EARACC REAL Accumulated reverse active energy value in Ws
ERFACC REAL Accumulated forward reactive energy value in VArS
ERRACC REAL Accumulated reverse reactive energy value in VArS
MAXPAFD REAL Maximum forward active power demand value for set
interval
MAXPARD REAL Maximum reverse active power demand value for set
interval
MAXPRFD REAL Maximum forward reactive power demand value for
set interval
MAXPRRD REAL Maximum reactive power demand value in reverse
direction
16.2.5 Setting parameters
Table 609: ETPMMTR Non group settings (basic)
Name
Values (Range) Unit Step Default Description
Operation Disabled
Enabled
- - Disabled Operation Enable/Disable
StartAcc Disabled
Enabled
- - Disabled Activate the accumulation of energy values
tEnergy 1 Minute
5 Minutes
10 Minutes
15 Minutes
30 Minutes
60 Minutes
180 Minutes
- - 1 Minute Time interval for energy calculation
tEnergyOnPls 0.000 - 60.000 s 0.001 1.000 Energy accumulated pulse ON time in secs
tEnergyOffPls 0.000 - 60.000 s 0.001 0.500 Energy accumulated pulse OFF time in secs
EAFAccPlsQty 0.001 - 10000.000 MWh 0.001 100.000 Pulse quantity for active forward accumulated
energy value
EARAccPlsQty 0.001 - 10000.000 MWh 0.001 100.000 Pulse quantity for active reverse accumulated
energy value
ERFAccPlsQty 0.001 - 10000.000 MVArh 0.001 100.000 Pulse quantity for reactive forward
accumulated energy value
ERVAccPlsQty 0.001 - 10000.000 MVArh 0.001 100.000 Pulse quantity for reactive reverse
accumulated energy value
Section 16 1MRK505222-UUS C
Metering
990
Technical reference manual