ABB Relion 670 series - Setting parameters; Boolean 16 to Integer conversion with logic node representation B16 IFCVI; Introduction

Name Type Default Description
IN5 BOOLEAN 0 Input 5
IN6 BOOLEAN 0 Input 6
IN7 BOOLEAN 0 Input 7
IN8 BOOLEAN 0 Input 8
IN9 BOOLEAN 0 Input 9
IN10 BOOLEAN 0 Input 10
IN11 BOOLEAN 0 Input 11
IN12 BOOLEAN 0 Input 12
IN13 BOOLEAN 0 Input 13
IN14 BOOLEAN 0 Input 14
IN15 BOOLEAN 0 Input 15
IN16 BOOLEAN 0 Input 16
Table 532: B16I Output signals
Name Type Description
OUT INTEGER Output value
14.5.5 Setting parameters
The function does not have any parameters available in the local HMI or PCM600.
14.6 Boolean 16 to Integer conversion with logic node
representation B16IFCVI
Function description
IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Boolean 16 to integer conversion with
logic node representation
B16IFCVI - -
14.6.1 Introduction
Boolean 16 to integer conversion with logic node representation function (B16IFCVI)
is used to transform a set of 16 binary (logical) signals into an integer.
B16IFCVI can receive remote values via IEC 61850 depending on the operator
position input (PSTO).
1MRK505222-UUS C Section 14
Logic
885
Technical reference manual