ABB Relion 670 series - Input and output signals

ANSI05000690-2-en.vsd
I103MEAS
BLOCK
I_A
I_B
I_C
IN
V_A
V_B
V_C
V_AB
V_N
P
Q
F
FUNTYPE
ANSI05000690 V2 EN
17.6.4 Input and output signals
Table 636: I103IEDCMD Input signals
Name Type Default Description
BLOCK BOOLEAN 0 Block of commands
Table 637: I103IEDCMD Output signals
Name
Type Description
19-LEDRS BOOLEAN Information number 19, reset LEDs
23-GRP1 BOOLEAN Information number 23, activate setting group 1
24-GRP2 BOOLEAN Information number 24, activate setting group 2
25-GRP3 BOOLEAN Information number 25, activate setting group 3
26-GRP4 BOOLEAN Information number 26, activate setting group 4
Table 638: I103CMD Input signals
Name
Type Default Description
BLOCK BOOLEAN 0 Block of commands
Table 639: I103CMD Output signals
Name
Type Description
16-AR BOOLEAN Information number 16, block of autorecloser
17-DIFF BOOLEAN Information number 17, block of differential protection
18-PROT BOOLEAN Information number 18, block of protection
Section 17 1MRK505222-UUS C
Station communication
1050
Technical reference manual