ABB Relion 670 series - Function block; Input and output signals; Signal matrix for mA inputs SMMI; Introduction

4.10.3 Function block
IEC05000439-2-en.vsd
SMBO
BO1
BO2
BO3
BO4
BO5
BO6
BO7
BO8
BO9
BO10
^BO1
^BO2
^BO3
^BO4
^BO5
^BO6
^BO7
^BO8
^BO9
^BO10
IEC05000439 V2 EN
Figure 36: SMBO function block
4.10.4 Input and output signals
Table 41: SMBO Input signals
Name Type Default Description
BO1 BOOLEAN 1 Signal name for BO1 in Signal Matrix Tool
BO2 BOOLEAN 1 Signal name for BO2 in Signal Matrix Tool
BO3 BOOLEAN 1 Signal name for BO3 in Signal Matrix Tool
BO4 BOOLEAN 1 Signal name for BO4 in Signal Matrix Tool
BO5 BOOLEAN 1 Signal name for BO5 in Signal Matrix Tool
BO6 BOOLEAN 1 Signal name for BO6 in Signal Matrix Tool
BO7 BOOLEAN 1 Signal name for BO7 in Signal Matrix Tool
BO8 BOOLEAN 1 Signal name for BO8 in Signal Matrix Tool
BO9 BOOLEAN 1 Signal name for BO9 in Signal Matrix Tool
BO10 BOOLEAN 1 Signal name for BO10 in Signal Matrix Tool
4.11 Signal matrix for mA inputs SMMI
4.11.1 Introduction
The Signal matrix for mA inputs (SMMI) function is used within the Application
Configuration Tool (ACT) in direct relation with the Signal Matrix Tool (SMT), see
the application manual to get information about how milliamp (mA) inputs are brought
in for one IED configuration.
1MRK505222-UUS C Section 4
Basic IED functions
107
Technical reference manual