Course Description
AEROSET
®
Customer Training Guide xiii
94858-103 — July 2003
Module 7 Quality Control presents the procedures and options for running quality con-
trol samples and management of quality control data.
Module 8 Configuration provides the information you will need to customize the
AEROSET System for your laboratory.
Module 9 ICT™ Unit provides an overview of the design and operation of the Inte-
grated Chip Technology
™
(used for ISE measurement).
Module 10 Maintenance provides important information on how to perform the
required Weekly and Monthly Maintenance Procedures on the AEROSET
System.
Module 11 Component Replacement and Troubleshooting discusses useful troubleshoot-
ing approaches and replacement of some of the major System components.
Module 12 Activities consists of exercises which strengthen and reinforce learning.
To Next Page
Loading...