Basic Run Activity
AEROSET
®
Customer Training Guide 2-29
94858-103 — July 2003
BASIC RUN ACTIVITY
Introduction
In this exercise, you will manually order and run several patient samples
on the FastTrack™ Sampler following the steps described in this
Module.
Objective
Upon completion of the Basic Run Activity, you will be familiar with:
• Ordering patient samples on the FastTrack Sampler
• Printing a Loadlist
• Loading samples
• Selecting Run options
• Starting a run
• System status types that are displayed during a run
Necessary Materials
Reagents:
• ICT™ Sample Diluent, Albumin, ALT, AST, Calcium, Creatinine,
Glucose, Phosphorus, Total Protein, Urea, and Iron
Other:
• Patient samples
Procedure
NOTE: Panel names have bolded text.
1. Select <Database> from the Information Access Area.
2. Select <Order>.
• During the activity, point out color
changes on database screen, changes in
system status, and lines in Run Progress
Area.
• Instructor will need prepared tubes for
the activity.
To Next Page
Loading...