Physical Hazards
AEROSET
®
Customer Training Guide Appendix-13
94858-103 — July 2003
PHYSICAL HAZARDS
Follow safe practices in the following situations to avoid physical injury.
Exposure to Laser Light
CAUTION: Class II Laser Product. Do not stare into
the beam or view directly with optical instruments.
Class II denotes low-power visible lasers or laser system.
Because of normal human aversion response, e.g.,
blinking, eye movement, etc., they normally do not
present a hazard to eyes. During normal operation, the
inner protective covers must remain in place to prevent
laser light exposure from the optics bench. The inner
protective covers should only be removed by qualified
Abbott Service Representatives.
Exposure to Heavy Objects
CAUTION: Lifting Hazard. The high-concentration
waste container is heavy when full. Use care when
handling the container to reduce the risk of injury.
Exposure to Hot Objects
CAUTION: Hot Surface. The lamp and lamp housing
may be hot. Before replacing the System source lamp,
wait at least five minutes after turning the power OFF
to allow the lamp and lamp housing to cool.
Trip Hazard
The AEROSET System is equipped with a power cord and various
computer connectors. To avoid a tripping hazard to Operators, ensure
cords in high traffic areas are properly stowed.
!
To Next Page
Loading...