MODULE 7: QUALITY CONTROL
7-44 AEROSET
®
Customer Training Guide
94858-103 — July 2003
ANSWERS
1. a. QC after Calib
b. Start - QC
c. Interval - QC
d. End - QC
2. A yellow line is displayed on the button in the
CALIBRATOR/CONTROL screen.
3. a. Select <Assays>.
b. Select <Calc>.
c. Select <QC>.
OR
a. Select <QC Summary>.
b. Highlight Calcium.
c. Select <LJ Graph>.
4. An Error Log Message is generated, and the violated rule with the
highest priority is displayed in the QC section of the ASSAY
STATUS screen.
5. a. Levey-Jennings Graph
b. QC Data List
c. QC Summary
To Next Page
Loading...