Panel Configuration
AEROSET
®
Customer Training Guide 8-23
94858-103 — July 2003
PANEL CONFIGURATION
The Panel Configuration option allows the Operator to pre-define groups
of assays that can be ordered at one time. Up to 100 assay panels can be
configured on the AEROSET System. The panels are displayed in the
Calibration QC and Order screens as well as the Order Samples
screen.
To configure assay panels:
•Select <Database> in the Information Access Area.
•Select <Order>.
•Select <PanelCfg>.
For information about configuration of assay panels, refer to
Panel Configuration in Section 2, Installation Procedures and
Special Requirements of the AEROSET System Operations
Manual.
• Reinforce must first select an
empty button before
configuring a panel.
• Panels are displayed on Order
Samples screen in the order
entered.
• Each panel must have a unique
number as an identifier.
• For convenience on these
instruments, we’ve started
numbering at 101 since
there are 100 available
assay buttons.
• Show how to clear panel.
To Next Page
Loading...