Review Questions
AEROSET
®
Customer Training Guide 11-23
94858-103 — July 2003
REVIEW QUESTIONS
1. If more than one Result Error Code is generated for a result, on
which screen are all the codes displayed?
2. What is typed on the Log On screen to SHUTDOWN the software
prior to Powering OFF?
3. How does the System indicate that a cuvette has failed the Integrity
Check and may need to be changed?
4. An Operator ran some QC samples after replacing the source lamp
and got the Result Error Code of “PHO” for multiple assays. What
could be causing this error?
5. Name six activities that can be performed in the MAINTENANCE
UTILITIES screen.
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
6. Leaking is observed from the High-Concentration Waste Pumps A
and B or from Probe Wash Pump A or B. What may need to be
replaced?
7. When replacing the dryer tips, a distance of _____________ should
be measured from the bottom of the dryer tip to the underside of the
nozzle mounting plate.
To Next Page
Loading...