MODULE 11: COMPONENT REPLACEMENT AND TROUBLESHOOTING
11-4 AEROSET
®
Customer Training Guide
94858-103 — July 2003
INTRODUCTION
The first section presents the different types of Error Log Messages and
codes that are displayed by the AEROSET System. This section focuses
on where each type of error is displayed and how to find the information
needed to resolve the issue that caused the generation of the code or
message.
The second section presents the correct Power OFF Procedure that
should be used prior to performing some troubleshooting and component
replacement procedures.
The third section describes the various pages of the MAINTENANCE
UTILITIES screen which allow the Operator to set the System date and
time, track specific component usage, and manually move robotics for
maintenance and troubleshooting purposes.
The last section overviews the replacement of System components.
Component replacement may be required, periodically due to normal
use, or as a troubleshooting procedure.
To Next Page
Loading...