Objectives
AEROSET
®
Customer Training Guide 6-3
94858-103 — July 2003
MODULE 6: CALIBRATION
OBJECTIVES
Upon completion of this Module, you will be able to:
1. Demonstrate a basic knowledge of kinetic rate and end-point assays
and the different calibration methods
2. Describe the calibration types available
3. State the reasons for calibrating the AEROSET System
4. Order calibrations and load the calibrators
5. Identify the screens and reports used to review calibration results
6. Recognize Calibration Error Codes associated with calibration
failure
To Next Page
Loading...