Activity
AEROSET
®
Customer Training Guide 4-27
94858-103 — July 2003
ACTIVITY
Introduction
In this exercise, you will manually order and run several patient samples
on the FastTrack™ Sampler and Sample Carousel with the additional
Run options described in this Module.
Objective
Upon completion of the Run Options Activity, you will be familiar with:
• Ordering patient samples in the Sample Carousel and FastTrack
Sampler
• Creating batch orders
• Editing patient sample orders
• Entering patient demographic information
• Ordering sample replicates
• Ordering samples for onboard dilution
• Ordering a patient sample to run in the Reserved STAT Position
• Adding samples during a run
Necessary Materials
Reagents:
• ICT™ Sample Diluent, Albumin, ALT, AST, Calcium, Creatinine,
Glucose, Phosphorus, Total Protein, Urea, and Iron
Other:
• Patient samples
• Instructor will need the prepared tubes
for the Run Options module.
• Point out that run is not started until
step #10.
• Wait for sampling to begin before
ordering the STAT.
To Next Page