Rerunning Results
AEROSET
®
Customer Training Guide 5-21
94858-103 — July 2003
RERUNNING RESULTS
An Operator may schedule results to be rerun from both the DATABASE
screen and the RESULT screen. Results can be rerun at the same dilution
or the dilution option can be changed before rerun.
NOTE: Because the System tracks the samples by carrier/
position, samples will not always be automatically returned for a
rerun.
Auto return for a sample does NOT occur if the Auto Return (for
Sample Crsl and/or Track Sampler), Auto Rerun, and Sample
Bar Codes options are all configured ON and the following
conditions also exist
:
If... Then
• A completed sample had a
rerun ordered and processed
and
• The same carrier/position is
used for a subsequent
sample(s)
and
• A rerun is scheduled for the
subsequent sample(s) as
indicated by an “R”
Processing Code on the
DATABASE screen
• The subsequent sample(s)
will NOT automatically be
returned to the sample
handler for processing
and
• The Operator must manually
move the sample to the right
of the sample handler to be
rerun or move the sample to
another carrier/position
To Next Page
Loading...