MODULE 8: CONFIGURATION
8-24 AEROSET
®
Customer Training Guide
94858-103 — July 2003
SYSTEM CONFIGURATION ACTIVITY
Introduction
In this activity, you will customize the AEROSET System to run in a
Host Query Mode with bar coded samples. You will learn to edit a
sample result print form and edit printer options.
Objectives
Upon completion of the System Configuration Activity, you will be
familiar with:
• Creating a User Code/Password
• Editing the Printer A and B configuration
• Editing the on-line communication configuration
• Entering an address and editing the assay display order in a sample
result report
Necessary Materials
Reagents:
• ICT™ Diluent, Albumin, ALT, AST, Calcium, Creatinine,
Glucose, Phosphorus, Total Protein, and Urea
Other:
• Bar coded sample tubes
Instructor will need to change the follow-
ing prior to this activity:
• Log on as extra/ex_tra or
guest/daily numerical
password.
• Save by Carrier ID-Off,
Sample Bar Codes-On.
• Set up Host Configuration for
simulator
• Select “Clear Database” on
SHUTDOWN screen.
• Cycle instrument power.
• When able to, Log on as
abbott/super
• Will need a set of bar coded
tubes for each instrument,
from refrigerator.
To Next Page
Loading...