Ordering and Running a STAT Sample
AEROSET
®
Customer Training Guide 4-17
94858-103 — July 2003
ORDERING AND RUNNING A STAT SAMPLE
1. The STAT patient sample must be loaded in the Reserved STAT
Position in the Sample Carousel prior to placing the order. Confirm
that the STAT Sampling Indicator Light is not illuminated and place
the sample in the STAT position.
Figure 4.8: Top View of the Sample Carousel
2. Lift the STAT position access portion of the Sample Carousel
Safety Shield. Load the sample into the Reserved STAT Position.
Lower the shield.
Reserved
STAT
Position
125696
To Next Page
Loading...