Abbott Diagnostics Aeroset - Review Questions

MODULE 6: CALIBRATION
6-36 AEROSET
®
Customer Training Guide
94858-103 — July 2003
REVIEW QUESTIONS
1. What are the six Calibration Methods (Math Models) currently used
for calibration on the AEROSET System?
a. ______________________________________________
b. ______________________________________________
c. ______________________________________________
d. ______________________________________________
e. ______________________________________________
f. ______________________________________________
2. What is the most common Calibration option used on the Aeroset?
3. Does the AEROSET System require you to calibrate an assay, if the
controls are out of range?
4. On the CALIBRATOR/CONTROL screen, how does the System
indicate that a calibrator is required for a run?
5. On what screen is the calibration curve displayed?
6. Why might a previous calibration curve need to be deleted?
7. Name the two screens in which an Operator can view an average of
the absorbance values measured for a calibrator.
a. ______________________________________________
b. ______________________________________________