Review Questions
AEROSET
®
Customer Training Guide 2-31
94858-103 — July 2003
REVIEW QUESTIONS
1. What screen is used to order patient samples and print a Loadlist?
2. What screen is used to start the run?
3. What is C/P?
4. How do you display more panels on the Order Samples screen if
you have more than 20 panels configured?
5. What is the difference between the Loadlist and the
Order List in the Print Options screen.
6. What is the purpose of the End-of-Run Carrier?
7. Why is it important to remove bubbles from the samples?
8. What color are the samples in the DATABASE screen while they
are running?
9. If two Albumin Reagent Cartridges are loaded in Reagent Supply
Center 1, one in position A-9 and another in position B-3, which will
the instrument aspirate from first?
10. When viewing the REAGENTS screen, you note that the remaining
volume of a reagent is displayed in pink. What does this indicate?
To Next Page
Loading...