MODULE 2: BASIC RUN
2-30 AEROSET
®
Customer Training Guide
94858-103 — July 2003
3. Select <New>, if necessary to display the Order Samples screen.
4. Enter the following information:
5. Select <New>.
6. Repeat steps 4 and 5 to order the following additional samples.
7. Select <OK> to return to the DATABASE screen.
8. Highlight all ordered samples.
9. Select <Print>.
10. Select <Loadlist>.
11. Select <OK> on the confirmation dialog window.
12. Load the samples in the specified positions and place on the
FastTrack™ Sampler.
13. Select <RUN> from the Action Area.
14. Select the Patient option and deselect all Calibration and QC
options.
15. Select <Start>.
16. During the run, observe the System status, run progress, and
database changes.
SID Name C/P Assays
501 Tress, Matt 1 / 1 Na-S, K-S, Cl-S, Crea, Urea
SID Name C/P Assays
502 Trola, Vic 1 / 2 Glu, AST, ALT, Iron
503 Fresco, Al 1 / 3 Chem1, Phos
504 Lifeboats, Mandy 1 / 4 Chem2, TP, AlbP
505 Pendous, Stu 1 / 5 Chem1, TP, AlbP
506 DeLyon, Dan 2 / 1 Crea, Urea, Phos
507 Moe, Ali 2 / 2 Chem1, TP, Crea, Urea
To Next Page
Loading...