Order Entry
AEROSET
®
Customer Training Guide 4-5
94858-103 — July 2003
ORDER ENTRY
There are three ways to enter orders:
• Manually, in the Order Samples screen
• Downloaded from a Host computer
• Host Order Query
Manual Order Entry
In Module 2, Basic Run, you performed manual order entry. To review
the steps:
1. Select <Database> from the Information Access Area.
2. Select <Order>.
3. Enter the desired sample information:
• Sample ID (required)
•Name
• C/P (required)
• Manual Dil*
• Replicates*
• Measurement Type*
• Patient Demographics*
4. Select the assay(s) and/or panel(s).
5. Select <New> to order more patient samples or <OK> when
ordering is complete.
* These options will be described in this Module.
To Next Page
Loading...