QC Summary Report
AEROSET
®
Customer Training Guide 7-35
94858-103 — July 2003
QC SUMMARY REPORT
Use the following instructions to print a report of the QC summary
statistics.
1. Select <QC Summary> in the Information Access Area of the
Main Display. The QC SUMMARY screen displays.
2. Select <Print> in the right column of the screen, or select the
desired assays then select <Print>. The Print Options dialog
window displays.
Figure 7.21: Print Options Dialog Window
3. Select one of the following print options:
NOTE: To print a date range, select either <Only Selected
Assay> or <All Assays> in addition to <Only Selected
Date Range>.
4. Select one of the following sort options:
Option Description
Only Selected Assay Only QC statistics for the assay(s) selected
on the QC SUMMARY screen are printed.
All Assays QC statistics for all configured assays are
printed.
Only Selected Date
Range
Only QC statistics for the configured date
range are printed.
Option Description
Assay All QC report(s) print for one assay before
printing the QC report(s) for the next assay.
Category Each category of the QC report prints for all
assays before printing the next QC report
category.
• Print an example of
Levey-Jennings graph
and QC Data List
reports.
To Next Page
Loading...