MODULE 6: CALIBRATION
6-4 AEROSET
®
Customer Training Guide
94858-103 — July 2003
INTRODUCTION
Assays must be calibrated before you can run samples on the AEROSET
System. In this Module, you will learn how assays are calibrated.
This Module introduces you to the different types of calibration for
photometric assays, the frequency of calibration, and how to order
calibrations. In addition, basic calibration theory is presented, and you
will learn how to review and manage calibration data.
NOTE: Calibration information for the ICT™ assays is
presented in Module 9, ICT Unit.
To Next Page
Loading...