MAINTENANCE UTILITIES Screen
AEROSET
®
Customer Training Guide 11-13
94858-103 — July 2003
MAINTENANCE UTILITIES SCREEN
The MAINTENANCE UTILITIES screen provides the Operator with
the ability to set the System date and time, track specific component
usage, and manually move robotics for maintenance and troubleshooting
purposes. In addition, the screen enables the Operator to perform the
System Backup and Restore Procedures. When selected, the
MAINTENANCE UTILITIES screen overlays the entire display.
Therefore, the ErrorLog icon is present on the right-hand column to
allow the Operator to access the Error Log for troubleshooting purposes.
The screen has seven pages which include:
• System
• SCC (System Control Center)
• Sampling
• Rgt (Reagent) Area 1
• Rgt (Reagent) Area 2
• Rxn (Reaction) Area
• SW (Software) Info
• Do not go into great detail
about these screens. OPS
Manual has more detail.
• Facilitator Notes for
maintenance screens are for
instructor’s reference only.
To Next Page
Loading...