Objectives
AEROSET
®
Customer Training Guide 8-3
94858-103 — July 2003
MODULE 8: CONFIGURATION
OBJECTIVES
Upon completion of this Module, you will be able to:
1. Create User Codes and Passwords with different access levels for
logging onto the System
2. Define System Configuration options
3. Define Print options
4. Describe the Host Interface options
5. Create assay panels
6. Describe the configuration necessary to define and run an assay
7. Configure the System to evaluate QC results and apply the
Westgard QC Rules
• Instructor should set up host
configuration for each
instrument.
To Next Page
Loading...