MODULE 9: ICT™ UNIT
9-14 AEROSET
®
Customer Training Guide
94858-103 — July 2003
ANSWERS
1. In Reagent Supply Center 1, in an outer segment
2. By flowing through the ICT Reference Solution preheater (a narrow
metal tubing around the water bath)
3. 15 µL
4. Blue Line - The current calibration slope
Brown Line - The 45% slope limit
5. To ensure that the tubing and probe are correctly connected to the
ICT Module so that there are no bubbles introduced and that the
flow is not blocked by a twisted seal
6. Bubbles In the ICT tubing
To Next Page
Loading...