MODULE 4: RUN OPTIONS
4-28 AEROSET
®
Customer Training Guide
94858-103 — July 2003
Procedure
NOTE: Panel names have bolded text.
Order Patient Samples in the Sample Carousel
1. Select <Database> from the Information Access Area.
2. Select <Order>.
3. Select <New>, if necessary to display the Order Samples screen.
4. Order the following patient samples in the Sample Carousel:
5. Select <New> after each sample.
Create a Batch Order
1. Enter the following information:
2. Select <Copy>.
3. Enter 4 for the number of copies.
4. Select <OK> on the Copy Order dialog window.
5. Select <OK> on the Order Samples screen.
Edit Patient Sample Orders
1. In the DATABASE screen, highlight the first sample of the batch
(Sample ID – A12345).
2. Select <Order> in the right-hand column.
3. Select <Edit> on the Order Samples dialog window.
4. Enter the following information:
NOTE: Select <Next> after editing each sample to save
the edits and move to the next sample.
SID Name C/P Assays
601 Pole, Tad 1000 / 1 Chem2, ALT, AST
602 Twishes, Bess 1000 / 2 ICT, Ca
603 Board, Bill 1000 / 3 Crea, Urea
604 Gator, Ali 1000 / 4 Chem1
SID C/P Assays
A12345 3 / 1 Glu
To Next Page
Loading...