Deleting Results
AEROSET
®
Customer Training Guide 5-33
94858-103 — July 2003
Deleting Results from the RESULT Screen
1. Select <Database> in the Information Access Area, if the screen is
not currently displayed.
2. Select the desired sample.
3. Select <Result> in the right-hand column. The RESULT screen is
displayed.
4. Select the result to be deleted.
5. Select <Delete> in the right-hand column (or press [D] on the
keyboard).
• If the result is an edited result, the Result field clears but the
assay name remains and the assay result remains pending.
• If the result was completed and calculated by the AEROSET
System, the assay name and result remains, but a “D” is
displayed on the left by the assay name.
NOTE: The printed report for a sample with a deleted
result will only print the assay name and any Result Error
Code (if present). The area where the result should
normally print is blank.
6. The deleted results are not sent to the Host or printed on reports, but
can still be viewed in the RESULT screen.
7. Select <OK> to exit to the DATABASE screen.
• If the deletion of an edited
value was in error, a value
can be edited back in to the
result field to clear the “R”
code brought on by the
deletion.
• Instrument needs to have a
number in the field to
transmit.
To Next Page
Loading...