MODULE 5: RESULT HANDLING
5-38 AEROSET
®
Customer Training Guide
94858-103 — July 2003
Procedure
NOTE: Panel names have bolded text.
1. Select <Database> from the Information Access Area.
2. Select <Order>.
3. Select <New>, if necessary to display the Order Samples screen.
4. Order the following patient samples:
** Load an empty tube into this position.
5. Select the ordered patient samples on the DATABASE screen and
print an Orderlist.
6. Load the samples in the Sample Carriers with an empty tube and an
adapter in Sample Carrier 9, Position 3. Place the carriers on the
FastTrack™ Sampler.
7. Select <RUN> from the Action Area.
8. Select the Patient option.
9. Select <Start>.
10. While the System is sampling, add the following Priority samples:
SID Name C/P Assays
1201 Daktul, Terry 8 / 1 ICT™, Glu
1206 Sklue, Elmer 8 / 2 Chem2
1208 Tard, Leah 8 / 3 Ca, Phos
1209 Zoff, Hans 8 / 4 Chem2
1211 Baer, Ted E. 8 / 5 ICT, Urea
1212 Closed, Doris 9 / 1 Ca, Iron
1215 Tone, Barry 9 / 2 Ca, Enz
1216** Ranger, Forrest 9 / 3** TP, AlbP
1217 Graph, Otto 9 / 4 Chem1, Phos
1220 Nems, Emmy 9 / 5 AST, TP, AlbP
SID Name C/P Assays
1225 Less, Ruth 3000 / 1 ICT
1226 Less, Penny 3000 / 2 Glu, Urea
To Next Page
Loading...