GLOSSARY
Glossary-8 AEROSET
®
Customer Training Guide
94858-103 — July 2003
Drying Tip Placed on the end of the Cuvette Washer nozzle that is used to dry the cuvette
before a sample is dispensed.
END RATIO Ratio of absorbances (A/B) used as a reaction check for Prozone.
END SUB Difference between absorbances (A-B) used as a reaction check for Prozone.
End-Point Assay An assay in which the concentration is calculated using the absorbance data
obtained in the Main Read Time specified on the Base page of the ASSAY
CONFIGURATION screen.
Extrapolated Calculation For the calculation of patient samples with concentrations higher than the
calibrators, the calibration curve may be extrapolated.
Factor Mode A calibration mode in which only the reagent blank is measured, and a user
defined factor is used to calculate results.
FastTrack™ Sampler The Track Sampler on the AEROSET System has the capacity of holding up to
200 samples.
To Next Page